Cybercab goes Animal Style

Seemingly as a fun Halloween post, the Tesla AI team shared a photo of a Cybercab, complete with passengers who were in costume, at an In-and-Out drive through. Based on the photos that were shared on X, it appeared that the Cybercab was being accompanied by a Tesla Model Y Premium. The Tesla AI team shared a lighthearted caption for the images, writing “Animal Style,” a reference to a popular secret menu item from the fast food chain.

In a way, the Tesla AI team’s Halloween post was a lighthearted reference to the popularity of In-and-Out among Tesla owners. This is partly because of the Tesla Supercharger network, which has numerous locations that are close to In-and-Out sites. Elon Musk has also jokingly confirmed in the past that driving prototype Teslas through an In-and-Out is a tradition and a fun milestone marker.

Apparent production-ready Cybercab sections

While the Tesla AI team’s photos provided some lighthearted fun to the EV community, some industry watchers pointed out that the Cybercab in the photos looked production ready, or at least some parts of it seem to be. This is especially noticeable in the Cybercab’s front end, which looks very refined and well-built. 

The front end of the Cybercab on the In-and-Out photo even had a license plate mount, and previous sightings revealed that the door of the vehicle had been updated since it was unveiled last year.

With this in mind, speculations are abounding that the Cybercab might indeed be ready for initial production soon. The installation of production equipment in Giga Texas has been ongoing for several months now, and tests of the Cybercab in both the Giga Texas complex and on public roads have also ramped. 

The post Tesla Cybercab almost looks production ready in new photos appeared first on TESLARATI.

Based on an image recently taken of the vehicle, it appears that Tesla has made the Cybercab’s cabin easier to get in and out of. 

Recent Cybercab sightings

As per recent posts on social media, it appears Tesla has started testing the Cybercab on public roads. Images posted by Tesla community members in Palo Alto showed a Cybercab prototype being driven near the company’s engineering headquarters. Interestingly enough, the vehicle was equipped with a steering wheel. 

It’s not just the Cybercab’s steering wheel that caught a lot of attention, however. Based on observations by EV watchers online, it appears that Tesla has also made the Cybercab’s door a bit larger. This should make it easier for passengers to get into and out of the autonomous two-seater. The position of the camera in the B-pillar also appears to have been adjusted slightly. 

All-in on autonomy

While Cybercab prototypes that are seen in the wild today are fitted with a steering wheel, the vehicle will be produced strictly as an autonomous Robotaxi. This was highlighted by Elon Musk during the third-quarter earnings call. Musk also expects about 2 million Cybercabs to be produced every year, making it the company’s highest-volume vehicle. 

“The single biggest expansion in production will be the Cybercab, which starts production in Q2 next year. That’s really a vehicle that’s optimized for full autonomy. It, in fact, does not have a steering wheel or pedals and is really an enduring optimization on minimizing cost per mile for fully considered cost per mile of operation,” Musk said during the Q3 2025 earnings call. 

The post Tesla Cybercab sighting highlights big change since 2024 unveiling appeared first on TESLARATI.

The expo will take place from November 5–10 at Shanghai’s National Exhibition and Convention Center.

Tesla Cybercab in China

Tesla announced its participation in the event on its official Weibo account. As per the electric vehicle maker, it would be occupying Booth A3-03 in Hall 2.1 at the National Exhibition and Convention Center. As noted in a CNEV Post report, the Cybercab, the company’s dedicated autonomous two-seater Robotaxi, will be making its Asia-Pacific debut at the CIIE as well. 

The company shared a graphic on Chinese social media which showed an image featuring several Tesla products, such as the Cybercab, Optimus, and Megapack batteries. The graphic also featured a building that read “Master Plan Part IV.”

Tesla’s momentum in China

Tesla’s return comes after skipping the event last year. Interestingly enough, Tesla attended the event from 2018 all the way to 2023. Tesla’s return to the CIIE then aligns with the company’s efforts to attract consumer interest in the world’s most competitive electric vehicle market. 

The Cybercab’s presence in the event could suggest that Tesla might be interested in bringing its Robotaxi to the country. This is quite interesting as China is already home to several autonomous ride-hailing services, though Tesla’s pure vision approach, which focuses on artificial intelligence and cameras, is quite unique. So far, Tesla has only rolled out its autonomous ride-hailing services in Austin, Texas, and the Bay Area, California.

The post Tesla Cybercab is heading to China’s import expo appeared first on TESLARATI.

The car was spotted just minutes from Tesla’s Engineering Headquarters in Los Altos, California. There are a few interesting tidbits we can gather from the photo and the information shared with it:

BREAKING: Tesla’s Cybercab spotted testing on public roads for the first time!

This was in Los Altos, California, about 10 minutes from Tesla’s Engineering HQ. As would be expected at this stage, a person was in the driver seat.

The future is autonomous pic.twitter.com/cvd6UrnKZo

— Sawyer Merritt (@SawyerMerritt) October 29, 2025

The vehicle had a driver and side view mirrors equipped on it, which seems to be pretty expected, especially at this stage.

Tesla might have been using its Full Self-Driving software with the vehicle as it enters this new stage of testing on public roads. This seems most likely, especially as the car, which has long been developed to be void of a steering wheel and pedals, will totally rely on autonomous tech to transport one or two passengers to their destination.

Additionally, side view mirrors are required by law at delivery, and Tesla was likely looking to keep things as safe and elementary as possible, especially with this early stage of testing.

As this is the first time the vehicle has been spotted on public roads and the first time it was likely testing on them, Tesla was being cautious.

There have been a lot of developments with Cybercab over the past few weeks, as the car has been spotted testing on the Fremont Factory’s test track, units have been seen outside of Gigafactory Texas’s crash testing facility, and there has been some additional speculation about what the vehicle’s standard equipment will be.

There have also been quite a few job postings by Tesla for manufacturing and production roles related to Cybercab over the past few weeks.

Yesterday, Tesla’s Board Chair, Robyn Denholm, revealed that the company could end up building Cybercab with a steering wheel and pedals, contrary to what Tesla and CEO Elon Musk have wanted to do.

Tesla Cybercab might be getting a huge change

The vehicle has yet to reach that stage of regulatory testing, but Tesla wants to start volume production in Q2. If it wants to release the vehicle without any manual controls, that means that Full Self-Driving will need to be completed within the next eight months.

The post Tesla Cybercab spotted testing on public roads for the first time appeared first on TESLARATI.

However, a Tesla executive said today that the company could ditch that idea altogether in what would be a major shift from the plans the company, and especially its CEO Elon Musk, have announced for the Cybercab.

Earlier today, Robyn Denholm, the company’s Chair for the Board of Directors, revealed that Tesla would potentially switch up its plans for the Cybercab based on potential regulatory requirements.

Credit: Tesla Europe & Middle East | X

Currently, even autonomous vehicles that operate for companies like Tesla and Waymo are required to have steering wheels and pedals. From a regulatory perspective, this could halt the plans Tesla has for Cybercab.

Denholm said in an interview with Bloomberg:

“If we have to have a steering wheel, it can have a steering wheel and pedals.”

Interestingly, Musk and Tesla have not veered away from the idea that the vehicle will be without these operational must-haves.

Since the vehicle was revealed last October at the We, Robot event in Los Angeles, Tesla has maintained that the car would be built without a steering wheel or pedals, and would equip two seats, which is what is statistically most popular in ride-sharing, as the vast majority of rides have only one or two passengers.

Musk doubled down on the plans for Cybercab as recently as last week, when he said:

“That’s really a vehicle that’s optimized for full autonomy. It, in fact, does not have a steering wheel or pedals and is really an enduring optimization on minimizing cost per mile for fully considered cost per mile of operation. For our other vehicles, they still have a little bit of the horse carriage thing going on where, obviously, if you’ve got steering wheels and pedals and you’re designing a car that people might want to go very direct past acceleration and tight cornering, like high-performance cars, then you’re going to design a different car than one that is optimized for a comfortable ride and doesn’t expect to go past sort of 85 or 90 miles an hour.”

Cybercab is fully conceptualized as a vehicle that has zero need for pedals or a steering wheel because it is aimed toward being fully reliant on a Level 5 autonomous platform.

Tesla is ramping its hiring for Cybercab vehicle manufacturing roles

Regulators could get in the way of this, however, and although the car could drive itself and be a great solution for ride-hailing, it might need to have these controls to hit the road in the future.

The post Tesla Cybercab might be getting a huge change appeared first on TESLARATI.

In preparation for its foray into fully autonomous travel, Tesla is gearing up for Cybercab manufacturing with 30 job postings, ranging from repair technicians to manufacturing specialists.

Elon Musk sets definitive Tesla Cybercab production date and puts a rumor to rest

The jobs are all located in Austin, Texas, where the company’s Gigafactory Texas facility is located. This is where Cybercab production is going to take place.

Tesla has made major strides in the Cybercab project over the past few months, including launching the vehicle on the Fremont Test Track in California and conducting crash testing at Gigafactory Texas.

All of these indicate the company is preparing for an imminent production effort of the vehicle, which, as Elon Musk said during last week’s Earnings Call, will be void of a steering wheel or pedals.

Tesla has the second quarter of 2026 as its projected start date for Cybercab production. It also plans to launch Semi and Megapack 3 for “volume production” starting next year, which will also be two major contributors to the company.

Musk spoke in great detail during the Earnings Call last week about Cybercab’s potential to change the grand picture of the automotive market, comparing other vehicles in the Tesla lineup to “a little bit of the horse-carriage thing.”

He said:

“That’s really a vehicle that’s optimized for full autonomy. It, in fact, does not have a steering wheel or pedals and is really an enduring optimization on minimizing cost per mile for fully considered cost per mile of operation. For our other vehicles, they still have a little bit of the horse carriage thing going on where, obviously, if you’ve got steering wheels and pedals and you’re designing a car that people might want to go very direct past acceleration and tight cornering, like high-performance cars, then you’re going to design a different car than one that is optimized for a comfortable ride and doesn’t expect to go past sort of 85 or 90 miles an hour.”

Cybercab production is imminent, given the job postings and the company’s proposed timeline for manufacturing to begin. Of course, there is always the potential that Tesla is late to the party, as it has been with other projects.

The post Tesla prepares for full-throttle manufacturing of major product appeared first on TESLARATI.

A check of the company’s Careers website shows 30 open positions tied to the Cybercab project, with 25 focused directly on vehicle manufacturing. The spike in listings suggests that Tesla may be gearing up for a production ramp of its fully autonomous two-seater at Giga Texas.

New Cybercab job listings

Tesla’s Careers page now features several new roles that appear crucial to the Cybercab’s buildout. Among the most recent additions are openings for Engineering Technicians for the Cybercab’s drive units, battery pack, and general assembly, as well as positions for Equipment Technicians for the vehicle’s production lines.

Earlier this month, Tesla only had three openings related to the autonomous two-seater’s manufacturing. Even then, it was already exciting as the Cybercab would be produced using Tesla’s “Unboxed” manufacturing process. This process is designed to make the Cybercab easier and quicker to produce. 

Similar to previous Cybercab-related job listings, all of the openings are currently based in Austin, Texas. This suggests that for now, at least, the production of the Cybercab will really be focused on Giga Texas to start.

Ultra-fast Cybercab production targets

Tesla CEO Elon Musk has described the Cybercab as the company’s highest-volume vehicle yet, targeting an annual production rate of around 2 million units. He added that the Cybercab line will operate more like a “high-speed consumer electronics” assembly process than a conventional car factory.

“If you’ve seen the design of the Cybercab line, it doesn’t look like a normal car manufacturing line,” Musk said earlier this year. “It looks like a really high-speed consumer electronics line. In fact, the line will move so fast that actually people can’t even get close to it.”

The post Tesla is ramping its hiring for Cybercab vehicle manufacturing roles appeared first on TESLARATI.

Tesla’s Cybercab was unveiled last October as the company’s two-seater, affordable option that would ultimately be the car used for autonomous travel. It was initially slated for production in late 2025 or early 2026.

Tesla is ramping up its hiring for the Cybercab production team

However, Tesla has finally said it will start production of the Cybercab in Q2 2026, a more concrete date for the company, as it has moved the entire project forward in recent weeks by testing it at the Fremont Test Track and conducting crash safety assessments.

Musk said on the Q3 2025 Earnings Call:

“The single biggest expansion in production will be the Cybercab, which starts production in Q2 next year. That’s really a vehicle that’s optimized for full autonomy. It, in fact, does not have a steering wheel or pedals and is really an enduring optimization on minimizing cost per mile for fully considered cost per mile of operation.”

In that quote, Musk also put a rumor that has been circulating within the community to rest. Some started to speculate whether Cybercab would be sold with a steering wheel and pedals, as many of the elements of the car seemed to hint toward not being exclusively autonomous, including side mirrors being equipped, among other things.

The @JoeTegtmeyer caught this Tesla Cybercab strolling around Giga Texas —

— with a steering wheel?! pic.twitter.com/PUvmpFp3Re

— TESLARATI (@Teslarati) February 24, 2025

It has been interesting to see some consider whether Tesla would sell the vehicle with the elements that would enable human control, especially as there have been a handful of images of the vehicle on company property with a steering wheel spotted.

However, Musk doubled down on the autonomous nature of the Cybercab with this confirmation during the earnings call, something that many investors likely wanted to hear because it was, in a way, a vote of confidence for the company’s path to autonomy.

The post Elon Musk sets definitive Tesla Cybercab production date and puts a rumor to rest appeared first on TESLARATI.

New Cybercab jobs

As can be seen on Tesla’s Careers website, three new Cybercab-related positions are currently available. Tesla is looking for a Metrology Technician, who will work on the Cybercab’s Quality team; an Equipment Engineer who will work on the Cybercab’s Plastics team; and a Tool & Die Supervisor, who will work in the Injection Molding team.  

All three positions are based in Austin, Texas, which is quite unsurprising as Giga Texas is the only facility today that has the capability to produce the vehicle. The Cybercab’s production is quite different compared to Tesla’s other vehicles, as it is the first car that would be produced using the company’s “Unboxed” process. 

Unlike any car that’s produced before

Elon Musk has previously said the Cybercab will be Tesla’s highest-volume vehicle, targeting an annual rate of 2 million units. He also mentioned that the vehicle’s manufacturing line will not resemble an automotive production line at all. Instead, it would resemble a high-speed consumer electronics line, which should pave the way for one Cybercab to be produced every few seconds.

“If you’ve seen the design of the Cybercab line, it doesn’t look like a normal car manufacturing line. It looks like a really high-speed consumer electronics line. In fact, the line will move so fast that actually people can’t even get close to it. I think it’ll be able to produce a car ultimately in less than 5 seconds,” Musk stated during Tesla’s All-Hands meeting earlier this year.

The post Tesla is ramping up its hiring for the Cybercab production team appeared first on TESLARATI.

Cybercab sightings fuel speculations

As observed by longtime Giga Texas drone operator Joe Tegtmeyer, Tesla had several covered Cybercab units outside the facility’s crash testing facility at the time of his recent flyover. The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size. Tegtmeyer also observed during his flyover that production of the Model Y Standard seems to be hitting its pace.

The drone operator noted that the seven covered Cybercabs might be older prototypes being decommissioned or new units awaiting crash tests. Either scenario points to a ramp-up in Cybercab activity at Giga Texas, however. “In either case, this is another datapoint indicating production is getting closer to happening,” Tegtmeyer wrote on X, highlighting that the autonomous two-seaters were quite exciting to see.

Cybercab production targets

This latest sighting follows reports of renewed Cybercab appearances at both the Fremont Factory and Giga Texas. A test unit was recently spotted driving on Giga Texas’ South River Road. Another Cybercab, seen at Tesla’s Fremont Factory, appeared to be manually driven, suggesting that the vehicle’s current prototypes may still be produced with temporary steering controls.

The Tesla Cybercab is designed to be the company’s highest-volume vehicle, with CEO Elon Musk estimating that the autonomous two-seater should see an annual production rate of about 2 million units per year. To accomplish this, Tesla will be building the Cybercab using its “Unboxed” process, which should help the vehicle’s production line achieve outputs that are more akin to consumer electronics production lines.

The post Multiple Tesla Cybercab units spotted at Giga Texas crash test facility appeared first on TESLARATI.